SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell.
Easy installation
PressFit cups for lighter weight
Narrow Q-factor and more ankle clearance
Integrated gutter seal to prolong life
Integrated adjuster
30mm spindle diameter
00.6418.009.000
5 Items
Specific References
EAN13
710845792625
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Kvadratinės jungties (Square Taper) kasetinis miniklio velenas su uždarais guoliais
Plieniniai kaušeliai
Sriegis: BSA
Korpuso ilgis: 68 mm
Bendras ašies ilgis (pasirinktinai): 119 mm / 112,5 mm / 127 mm
High-quality bearings: the BB30 bottom bracket from Truvativ. BB30 named for its required spindle size cuts weight by up to 100 grams, narrows Q-factor, increases ankle clearance, and ups bearing durability. It's a fairly new standard involving...
A good quality Shimano bottom bracket. Accurate bearings for smooth operation with improved durability. Durable sealed cartridge bottom bracket with square tapered axle. Sealed cartridge bearing assembly keeps out mud, dirt and water. Better...
SRAM DUB crank standard, built on a 29mm spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for...
Replacement bearings and shell for Shimano XTR Hollowtech II FC-M980/M985 bottom bracket. BSA thread 1,37 x 24, for 68/73 mm width and also for E-Type derailleurs.
Shimano XTR Bottom Bracket SM-BB93 Hollowtech II
Material: Aluminum
Case width: 68...
Įpresuojamo tipo Shimano Deore MT500 miniklio velenas
Korpuso diametras: 41 mm
Korpuso plotis: 89.5-92 mm
Ašies diametras: 24 mm (Hollowtech II)
Svoris: 72 g
Kairės pusės guoliai, dešinės pusės guoliai, korpusas, 2.5mm tarpinė
Square taper bottom bracket, which fits many bicycle types, including MTB/Trekking/City/Kids-Junior/Cross and etc. This bb set has sealed bearing cartridge, which is protected from dirt and water. It has most common 68mm shell size.
Type: Square...
Press-Fit BB use 24 mm axle and bearings, because 24 mm diameter axle and bearings offers the best balance of rotating performance, stiffness, strength, sealing, weight, for press-Fit type as well.
BB-Type: Press Fit (41x24mm)
Press-Fit BB shell...
Square taper bottom bracket, which fits many bicycle types, including MTB/Trekking/City/Kids-Junior/Cross and etc. This bb set has sealed bearing cartridge, which is protected from dirt and water. It has most common 68mm shell size.
Type: Square...
error Your review appreciation cannot be sent