Rear hub 1-speed freewheel
Teeth (Optional): 16T OR 17T OR 18T OR 19T OR 20T OR 21T OR 22T
Fits chain size: 1/2" x 1/8"
Driver: 2 Pawls
Outer body/Inner body cog: Cold Forged Steel
Screw Cap: Steel
Bearing: Loose Ball
Thread: BC1.37 x 24TPI
Weight: 194 g (16T)
Can be used with single speed
Please make sure your chain is correct size (1/2" x 1/8")
FRWE79
5 Items
Specific References
EAN13
4710944239539
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The CS-HG500-10-speed HG cassette is optimized for CN-HG500 or HG-X 10-speed / HG 10-speed chains.
Hyperglide sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load....
Speeds: 11-Speed
Type: Cassettte
Compatible with SHIMANO/SRAM
Function: Super Fluid Drive
Number of Teeth (OPTIONAL): 11-32T OR 11-28T
Gear Combination (OPTIONAL): 11-12-13-15-17-19-21-24-28-32 OR N/A
Spider Material: Steel / ED Black
Sprockets On...
Speeds: 9-Speed
Type: Cassettte / 9-spline (will not fit hubs with thread)
Compatible with SHIMANO/SRAM
Function: Super Fluid Drive
Number of Teeth (OPTIONAL): 11-25T OR 11-28T OR 12-25T
Gear Combination(OPTIONAL): 11-12-13-15-17-19-21-23-25 OR...
Speeds: 10-Speed (Wide Ratio)
Compatible with SHIMANO/SRAM
Type: Cassettte (will not fit hubs with thread)
Function: Fluid Drive Plus
Number of Teeth (OPTIONAL): 11-40T OR 11-42T
Gear Combination(OPTIONAL): 11-13-15-18-21-24-28-32-36-40 OR...
Perfect for front single and double MTB drivetrains, SHIMANO's M5100-11cassette offers Rider Tuned gear steps for maximum cadence control across the varied terrain of mountain biking.
Ride anywhere with smooth and precise HG shifting
11-speed...
Speeds: 9-Speed
Type: THREADED (not compatible with splined hubs)
Thread is the same as Shimano TZ500, so it is compatible with most threaded hubs
Designed to use with E-Bikes, but can also be used with standard bicycles
Lock Ring Type: YES...
The Shimano Acera CS-HG41 8-speed cassette has a computer designed tooth configuration with contoured shift gates, combined with close ratio gearing which allows a more efficient use of energy through finer cadence control, the result is a very...
Shimano galinis žvaigždžių blokas, skirtas 7 pavarų sistemai
Su stipinų apsauga, neleidžiančia grandinei patekti tarp žvaigždžių bloko ir stipinų
Blokas yra užsukamas - galinio rato įvorė turi turėti sriegį
Dantukų skaičius (mažosios-didžiosios):...
Rear cassette sprocket
Teeth (OPTIONAL): 12T OR 14T OR 15T
Fits chain size: 1/2 x 3/32"
9-spline type
For 7/8-speed drivetrains
Weight: 13 g (12T) / 28 g (14T) / 36 g (15T)
Compatible with standard Shimano/SRAM 7/8-speed cassettes, which uses...
Speeds: 10-Speed
Type: Cassettte / 9-spline (will not fit hubs with thread)
Compatible with SHIMANO/SRAM
Function: Fluid Drive Plus
Number of Teeth: 11-36T
Gear combination: 11-13-15-17-19-21-24-28-32-36
Sprocket Material: Hi-Tensile Steel...
For 8-Speed system drivetrain
Super Fluid Drive technology for smooth shifting
Number of Teeth (OPTIONAL): 11-32T or 11-34T
Gear Combination(OPTIONAL): 11-13-15-18- -21-24-28-32 or 11-13-15-18- -21-24-28-34
Light Weight Holes
Spacer Material:...
Speeds: 10-Speed
Compatible with SHIMANO/SRAM
Type: Cassettte (will not fit hubs with thread)
Function: Fluid Drive Plus
Number of Teeth: 11-36T
Gear Combination: 11-13-15-17-19-21-24-28-32-36
Spider Material: Aluminum / Red Anodized
Sprockets On...
SHIMANO SLX M7000 11-speed Hyperglide cassette uses the lighter aluminium spider construction with aluminium and steel cogs. The lightweight 11-40 tooth cassette weights only 467 g and the wider 11-42 tooth version provides an extremely wide gear...
Speeds: 9-Speed
Type: Cassettte / 9-spline (will not fit hubs with thread)
Compatible with SHIMANO/SRAM
Function: Super Fluid Drive
Number of Teeth (OPTIONAL): 11-25T OR 11-28T
Gear Combination(OPTIONAL): 11-12-13-15-17-19-21-23-25 OR...
System engineered for use with the SHIMANO ULTEGRA R8000 groupset, the R8000 cassette is available in a wide range of road and mixed surface ratios. It is compatible with HG-EV and HG-X11 chains.
High-performance gear combinations provide...
error Your review appreciation cannot be sent