Rear hub 1-speed freewheel
Teeth (Optional): 16T OR 17T OR 18T OR 19T OR 20T OR 21T OR 22T
Fits chain size: 1/2" x 1/8"
Driver: 2 Pawls
Outer body/Inner body cog: Cold Forged Steel
Screw Cap: Steel
Bearing: Loose Ball
Thread: BC1.37 x 24TPI
Weight: 194 g (16T)
Can be used with single speed
Please make sure your chain is correct size (1/2" x 1/8")
FRWE78
5 Items
Specific References
EAN13
4710944239591
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Speeds: 10-Speed
Type: Cassettte
Compatible with SHIMANO/SRAM
Function: Super Fluid Drive
Number of Teeth (OPTIONAL): 11-25T OR 11-32T
Gear Combination (OPTIONAL): 11-12-13-14-15-17-19-21-23-25 OR 11-12-13-15-17-19-21-24-28-32
Spider Material:...
Speeds: 8-Speed
Type: THREADED (not compatible with splined hubs)
Thread is the same as Shimano TZ500, so it is compatible with most threaded hubs
Designed to use with E-Bikes, but can also be used with standard bicycles
Lock Ring Type: YES...
The Shimano Acera CS-HG41 8-speed cassette has a computer designed tooth configuration with contoured shift gates, combined with close ratio gearing which allows a more efficient use of energy through finer cadence control, the result is a very...
Rear hub 1-speed freewheel
Teeth (Optional): 16T OR 17T OR 18T OR 19T OR 20T OR 21T OR 22T
Fits chain size: 1/2" x 1/8"
Driver: 2 Pawls
Outer body/Inner body cog: Cold Forged Steel
Screw Cap: Steel
Bearing: Loose Ball
Thread: BC1.37 x 24TPI...
SHIMANO SLX M7000 11-speed Hyperglide cassette uses the lighter aluminium spider construction with aluminium and steel cogs. The lightweight 11-40 tooth cassette weights only 467 g and the wider 11-42 tooth version provides an extremely wide gear...
Rear hub 1-speed freewheel
Teeth (Optional): 16T OR 17T OR 18T OR 19T OR 20T OR 21T OR 22T
Fits chain size: 1/2" x 1/8"
Driver: 2 Pawls
Outer body/Inner body cog: Cold Forged Steel
Screw Cap: Steel
Bearing: Loose Ball
Thread: BC1.37 x 24TPI...
The new 10-52t, XG-1295 cassette gives riders more than ever before, with an unprecedented 520-percent range. For a little extra to avoid the hike-a-bike, a little more in the "spin to win game, the XG-1295 cassette also allows stronger riders to...
Ultegra R8100 - Leave Time Behind. When developing the Ultegra R8100 series, Shimano took a holistic and 100 % performance-oriented approach, because great speed means great responsibility. Faster than ever before, the 12-speed road groupset...
Speeds: 9-Speed
Type: Cassettte / 9-spline (will not fit hubs with thread)
Compatible with SHIMANO/SRAM
Function: Super Fluid Drive
Number of Teeth (OPTIONAL): 11-25T OR 11-28T OR 12-25T
Gear Combination(OPTIONAL): 11-12-13-15-17-19-21-23-25 OR...
The Shimano Acera CS-HG41 8-speed cassette has a computer designed tooth configuration with contoured shift gates, combined with close ratio gearing which allows a more efficient use of energy through finer cadence control, the result is a very...
Speeds: 11-Speed (Wide Ratio)
Compatible with SHIMANO/SRAM
Type: Cassettte (will not fit hubs with thread)
Function: Fluid Drive Plus
Number of Teeth: 11-50T
Gear Combination: 11-13-15-18-21-24-28-32-36-42-50
Spider Material: Aluminum / Red...
Light and reliable
Compatible with Shimano and Sram 10 speed transmissions
Dyna-Sys Component, HyperGlide Technology
Sprockets, star and lock nut in aluminium
Silver
Art. Nr.: ICSHG8110132, ICSHG8110134, ICSHG8110136
Rear hub 1-speed freewheel
Teeth (Optional): 16T OR 17T OR 18T OR 19T OR 20T OR 21T OR 22T
Fits chain size: 1/2" x 1/8"
Driver: 2 Pawls
Outer body/Inner body cog: Cold Forged Steel
Screw Cap: Steel
Bearing: Loose Ball
Thread: BC1.37 x 24TPI...
error Your review appreciation cannot be sent